.pdf_cmp_copy-of-tabs-and-folders010_vbtn.gif){kind=small}
.pdf_cmp_copy-of-tabs-and-folders010_vbtn.gif){kind=small}
Tubing Bending Tools For Marine Professionals
The Bendarc & Crownarc tubing
bending tools are the most widely used tools, world-wide, for fabricating canvas
enclosures for pleasure boats. There are quality distributors across North
America and in Europe. These 2 pieces of equipment and their interchangeable die
system bring precision and professionalism to the marine canvas shop.
|
Bendarc Quick-Switch Sizes & Prices |
||||
 |
7/8” or
1”round (22mm or 25mm) |
11/4”round | 1”
or 1 1/4" square (25mm) |
|
| Bendarc 6” radius | $450 | |||
| Bendarc 8” radius | $504 | |||
| Bendarc 10” radius | $564 | $789 |
$699 (1" only) |
|
| Bendarc 12” radius | $639 | $867 | $768 (1" or 1 1/4") | |
|
Note: 1” square and 1¼” round models have the forming block encased in steel plate for extra strength and long life. 1 ¼” round has a longer, stronger, super-duty bend arm. (HD arms are available for more leverage on other sizes) |
||||
|
Square Bendarcs
use an inverted V (^)
for strong, precise bends. The 12”, 1” square Bendarc is a lightning fast way to bend awning ribs including 1" square and slotted "staple-in" tubing. |
||||
Bendarc Quick-Switch professional benders have interchangeable dies for tube size and radius.
The following parts allow you to change tube and radius sizes:
| Forming Blocks |
7/8”or
1”round (22mm or 25mm) |
11/4”round | 1” or 1 1/4" square (25mm) |
|
|
|
6” radius | $120 | ||
| 8” radius | $180 | |||
| 10” radius | $234 | $669-7 pc kit | $390 (1" only) | |
| 12” radius | $312 | $732-7 pc kit | $450 (1" or 1 1/4") | |
| Bendarc Roller | $45 | $51 | $51 (1" or 1 1/4") | |
| Clamp Block Assembly | $36 | $45 | $36 (1" or 1 1/4") | |
|
Bend Arm - $162 |
||||
When ordering a forming block
in a different tube size for your Bendarc Quick-Switch,
you will also need a clamp block and roller in that size.
Older Bendarcs will not accept Quick-Switch parts.
Quick-Switch models have square steel
pull-down arms with 3 or 4 positions for the roller.
Older
3 position arms cannot use
12” radius.
A 10% discount applies to additional Q-S parts ordered with a Bendarc.
Bendarc
Rollers have high-strength steel, sleeve bearings for long life.
Bendarc is available in a double, high-production, sliding model.
|
Crownarc Sizes & Prices |
||||
|
|
7/8”and 1”round (22mm and 25mm) |
11/4”round |
1” or 1 1/4" square (25mm) |
|
|
Crownarc 3 roller crank driven crowner |
$417 | $495 | $459 | |
| w.extra large gears | ||||
|
Std. Crownarc
|
||||
| Crownarc
for 11/4” round tubing rolls 1” and 7/8” round tubes. |
||||
| Crownarcs for round tube roll any round size smaller than the stated size. | ||||
|
Crownarc Parts List |
|||
|
7/8
& 1”round (22mm and 25mm) |
11/4”round |
1" or 1 1/4" square (25mm) |
|
| Center Roller w bearing | $51 | 60 | $60 |
| Outer Roller–not mounted | $48 | $57 | $57 |
| Outer Roller–gear mounted | $66 | $99 extra-large gear | $75 |
| Slide Block Assembly-3 pc | $39 (New style-minimizes wobble) | ||
| Hand Grip |
$24 (New style-polished, heavy duty) |
||
| Crank Arm | $42 (double-bent, drilled) | ||
| Back Plate w Weld Nut, Powder Coated Finish | $162 | ||
Older Crownarcs will accept square
rollers if they have
¾” roller shafts, approx. 8 3/8”
on center between the lower rollers.& 1 1/4" rollers with large gears if there
are 2 extra roller mount holes visible from the rear of the Crownarc.
(If not, 4 needed extra holes can be drilled)
|
EZ Frame Software for Windows |
|
| EZ
frame Software & Complete Instructions EZ Frame totally automates the calculation and bending of 11 different types of boat frames. |
$295 |
This price list, dated March 2011 supersedes all previous prices. Specifications and prices are subject to change.
 |
ARC
Integrated Systems Production: 2375 Refugee Park, Columbus Ohio 43207, USA Office: 2525 Berwick Blvd, Columbus Ohio 43209 USA 614 235 8181, 866 805 8005 toll-free, 614 235 6030 fax arcintsys@gmail.com |
 |